View OPIA2210DTUE_2011209.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 1 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package description: the opia series optocouplers are designed for applic ations that use an analog ou tput (phototransistor or photodarlington) in a dual-in-line package. a wide selection of configurations are available. with typical isolation voltage of 3,750 or 5,000 volts(rms), these product m eet typical power system isolation requirements. theory of operation: the led transmitter is used to i lluminate the photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. in many applications, analog signal levels ma y be required to be transmitted between two power systems while maintaining isolation between the power system s up to 5,000 volts(rms). a variety of led and photosensor configurations are availabl e depending on the system requirements. the ratio current transfer ratio (ctr) is determine d using the output current and input current for analog photosensors. ctr ratios can range from as lo w as 5 to over 9,000 depending on the device. all dip product is shipped in a shipping tube wi th ?tu? identified on the end of the part number. example: opi4n35dtue is a 6-pin dip shipped in a tube (tu). . features: ? 3,750 or 5,000 vrms electrical isolation ? choice of a single and dual led ? phototransistor or photodarlington sensor ? low-cost plastic dual-in-line (dip) package agency approvals: ? ul certification no: e58730 ? vde no: 40026624,40026625 rohs applications: ? high voltage isolation ? pcboard power system isolation ? industrial equipment power isolation ? medical equipment power isolation ? office equipment 200 100 * 10 20 = = ? ? = ma ma curren t led current r photosenso ctr
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 2 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package analog output devices ordering information part number isolation voltage max. (vrms) ctr min/typ/max typ. tr / tf (s) r l = 100 ohms package configuration opia4n35d 5,000 60 / - / 600 5 / 4 6 pin dip a k?b c e opia5010d 5,000 600 / - / 9,000 60 / 50 6 pin dip a k?b c e (dar) opia3n33d 5,000 500 / 4,000 / - 5 / 60 6 pin dip a k?b c e (dar) opia2210d 5,000 50 / - / 600 2 / 3 6 pin dip a k?b c e opia6010d 5,000 50 / - / 600 2 / 3 6 pin dip a k, k a?b c e opia2110d 5,000 40 / - / 400 4 / 3 6 pin dip a k?c e configuration: definition of terms led identification?sens or identification configuration information led a = anode k = cathode sensor b = base c = collector e = emitter packaging part number suffix: tu = ship in tubes example: opi4n35dtu e part number pin # 1 2 3 4 5 6 opia4n35 a k e c b opia5010 a k e c b opia3n33 a k e c b opia2210 a k e c b opia6010 a-k k-a e c b opia2110 a k e c symbol definition symbol definition symbol definition symbol definition a anode b base c collector e emitter package outline dimensions and schematics: top-view
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 3 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package absolute maximum ratings (t a = 25 o c unless otherwise noted) storage temperature -55 c to +125 c operating temperature opia4n35, opia5010, opia3n33 opia2210, opia6010, opia2110 -30 c to +100 c -55 c to +125 c isolation voltage (1 minute) 5,000 vrms total package power dissipation 200 mw lead soldering temperature (1/16? (1.6 mm) from case for 5 seconds with soldering iron) 260 c input diode continuous forward current 50 ma peak forward current (1 s pulse width, 300 pps) 1 a reverse voltage 6 v power dissipation 70 mw output phototransistor collector-emitter voltage opia4n35, opia6010, opia2110 opia2210 opia5010 opia3n33 60 v 350 v 300 v 30 v emitter-collector voltage opia4n35, opia2110 opia2210, opia6010 opia5010, opia3n33 6 v 7 v - collector current opia4n35, opia2210, opia6010, opia2110 opia5010, opia3n33 50 ma 150 ma power dissipation opia4n35, opia2110 opia5010, opia3n33, opia2210, opia6010 150 mw 200 mw
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 4 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package electrical characteristics (opia6 _ _ series) symbol parameter min typ max units test conditions input diode v f forward voltage opia4n35, opia5010, opia3n33, opi604, opia2110 opia2210 - 1.0 1.2 1.2 1.4 1.3 v i f = 20 ma i f = 10 ma v fm peek forward voltage opia4n35, opia5010, opia3n33, opi604 opia2210, opia2110 - - - - 3.5 3.0 v i fm = 500 ma i r reverse current opia4n35, opia5010, opia3n33, opi604, opia2110 opia2210 - - - - 10 10 a v r = 4 v v r = 5 v c t terminal capacitance opia4n35, opia5010, opia3n33, opi604, opia2110 opia2210 - - 30 30 - - pf v = 0.0 v, f = 1k hz v = 0.0 v, f = 1m hz output phototransistor? opi4n35d, opia2210d, opia6010d, opia2210d i ceo collector dark current opia4n35, opia6010, opia2110 opia2210 - - - 10 100 200 na i f = 0 ma, v ce = 20 v i f = 0 ma, v ce = 300 v v ceo collector-emitter sa turation voltage opia4n35, opia6010, opia2110 opia2210 - - 0.1 - 0.3 0.4 v i f = 20 ma, i c = 1 ma i f = 8 ma, i c = 2.4 ma f c cutt-off frequency - 80 - k hz v cc = 5 v, i c = 2 ma, r l = 100 t r rise time opia4n35, opia6010 opia2210 opia2110 - - - 5 2 4 20 - 20 s v cc = 5 v, i c = 2 ma, r l = 100 v cc = 10 v, i c = 2 ma, r l = 100 v cc = 2 v, i c = 2 ma, r l = 100 t f fall time opia4n35, opia6010 opia2210 opia2110 - - - 4 3 3 20 - 20 s v cc = 5 v, i c = 2 ma, r l = 100 v cc = 10 v, i c = 2 ma, r l = 100 v cc = 2 v, i c = 2 ma, r l = 100 continued on next page
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 5 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package electrical characteristics (opia6 _ _ series) - continued from previous page symbol parameter min typ max units test conditions output photodarlington? opia5010d, opia3n33d i ceo collector dark current opia5010 opia3n33 - - - - 1.0 0.1 a i f = 0 ma, v ce = 200 v i f = 0 ma, v ce = 10 v v ceo collector-emitter sa turation voltage opia5010 opia3n33 - - - - 1.5 1.0 v i f = 20 ma, i c = 5 ma i f = 8 ma, i c = 2 ma f c cutt-off frequency opia5010, opia3n33 - 7.0 - k hz v cc = 5 v, i c = 2 ma, r l = 100 t r rise time opia5010 opia3n33 - - 60 5 300 40 s v cc = 2 v, i c = 20 ma, r l = 100 v cc = 10 v, i c = 50 ma, r l = 100 t f fall time opia5010 opia3n33 - - 50 60 250 100 s v cc = 2 v, i c = 20 ma, r l = 100 v cc = 10 v, i c = 50 ma, r l = 100 coupled characteristics? opia6xxx series ctr current transfer ratio opia4n35 opia5010 opia3n33 opia2210 opia6010 opia2110 60 600 500 50 60 40 - - 4,000 - - - 600 9,000 - 600 600 400 % i f = 2 ma, v ce = 5.0 v i f = 2 ma, v ce = 5.0 v i f = 10 ma, v ce = 10.0 v i f = 5 ma, v ce = 5.0 v i f = 1 ma, v ce = 5.0 v i f = 10 ma, v ce = 5.0 v c f floating capacitance - 0.6 1. 0 pf v = 0.0 v, f = 1m hz r iso isolation resistance 5x10 10 10 11 - ohm dc500v
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 6 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opi4n35
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 7 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opi4n35
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 8 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia5010
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 9 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia5010
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 10 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia3n33
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 11 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia3n33
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 12 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia2210
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 13 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia2210
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 14 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia6010
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 15 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia6010
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 16 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia2210
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 17 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package opia2210
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 18 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package quality / reliability requirements note: this is to be performed when a change occurs to form, fit or function. government and industry standard compliance requirements european union?s reduction of hazardous substances (rohs) directive 2002/95/ec parameter failure criteria conditions htrb d i c(off) 10% 11 samples after 500hrs 0 fail @ vce = 5.0vdc, ta = 70c htfb d i c(on) 10% 50 samples after 96hrs 0 fail @ max p d , ta = 25c mttf @ 90% confidence 150, 000 min. @ 25c, 25madc moisture sensitivity level msl 1 per jdec stnd j-std-020b lead solderability 0 fail per method 208 of mil-std-202. glass transition of body 125 c min. dsc test method temperature humidity-bias 20% 85c, 85%rh, 500hrs, 80% min iceo temperature cycle 20% per method 1010.7 of mil-std-883e high temperature storage 20% 85c, 500hrs autoclave 0 fail t a = 121c, pressure = 15psi, humidity = 100%, time = 96hrs label identification description: size: 3? (7.4 cm) x 2.2? (5.5 cm) lettering shall be black on white background. format shall be as: notes: 1. the date code is a 4-digit code for date of manufacture where yy is the last two digits of the year, and ww is week number of manufacture. 2. the lot i.d. is the manufacturing location lot identification where y is the year of manufacture, nnnn is a sequential lot identifier, and ddd is the day of the year of manufacture. ? or use equivalent label format. carrollton, tx, usa made in taiwan optek p/n __opi4n35d -tu__ ii ii iii i iii ii iiii ii i i qty. ________n/a_________ ii ii iii i iii ii iiii ii i i date code _____(yyww) ___ ii ii iii i iii ii iiii ii i i lot i.d. ____(y-nnnnddd) __ ii ii iii i iii ii iiii ii i i
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 9/09 page 19 of 19 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia4n35, opia5010, opia4n33 opia2110, opia2210, opi6010 dip package packaging information: quantity: 6-pin: 65pcs/tube tube packaging specifications (tu): optek's optocoupler part numbers packaging quantities tube inner small carton medium carton large carton qty weight 52 x 7 x 7.5 cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm qty weight qty weight gross weight qty weight gross weight qty weight gross weig ht p/h and smd 4-pin opia400d/a, opia410d/a - opia413d/a 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 6-pin opia6xxd/a series 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 8-pin opia8xxd series and opid804d 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 m/f sop 4-pin and 5-pin opia401b - opia404b, opia414b, opia500b 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 ssop 4-pin opia405c - opia409c 170 -- 10,200 -- p/h = pin-hole packages (referred as d = dual-in-line package) smd = standard surface mount packages (referred as a = 6.5mil smd) m/f or sop = mini-flat packages or small outside package s (referred as b = 4.40mil smd w/ 2.54mil lead- spacing) ssop = shrink sop packages (referred as c = 3.60mil smd with 1.27mil lead-spacing)

▲Up To Search▲

Price & Availability of OPIA2210DTUE

	To Download OPIA2210DTUE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .